材料科学与工程学院
首页 > 研究生教育 > 研究生导师 > 正文

林佳

来源:   时间:2020-09-29 
林佳 副教授 简介
林佳,女,博士,硕士生导师。2010 年进入哈尔滨工业大学
复合材料与结构研究所攻读博士学位,致力于超高温陶瓷材料的研
究工作。2013 年进入厦门理工学院工作,基于超高温陶瓷材料的
制备与性能提升等进行了大量的研究工作,分别于 2015 年和 2016
年入选“福建省高校杰出青年科研人才计划”和“福建省高等学
校新世纪优秀人才支持计划”,2018 年获得厦门理工学院“鹭江
优秀学者”的荣誉称号。2019 年进入英国 Bristol 大学开展基于
“微纳 3D 打印超高温陶瓷材料”的访问研究。
近年在材料科学领域顶级期刊 Corrosion Science(IF6.76)、Materials & Design
(IF6.25)、Journal of the European Ceramic Society(IF4.34)、Materials Characterization
(IF3.62)等国内外学术期刊发表论文 40 篇,其中 SCI/EI 论文 31 篇,以第一作者发表 SCI
论文 27 篇(JCR 分区一区、二区),影响因子之和为 115.156。这些研究工作被本领域知名学
者所引用并给予了高度评价,Google Scholar 总引 319 次,SCI 总引 269 次,SCI 单篇他引最
高 24 次。申请国家发明专利 6 项,已获授权 3 项。
主要研究领域:
[1].光固化 3D 打印技术的应用
[2].先进结构材料的合成理论、制备与应用技术研究
[3].材料的强韧化机理与技术
近年来承担的主要科研项目:
[1].国家自然科学基金面上项目,51772253,可用于 3D 打印的 Zr-B-Si-C 超高温陶瓷材料设计与原位
合成研究,2018/01–2021/12,主持
[2].福建省自然科学基金面上项目,2018J01523,基于立体光刻 3D 打印技术的 Zr-B-Si-C 系超高温陶
瓷材料的研究,2018/04–2021/4,主持
[3].国家自然科学基金青年基金项目,51402248,原位自生碳纳米管增韧二硼化钛基陶瓷的韧化机制
研究,2015.01-2017.12,主持。
[4].福建省教育厅 A 类项目,JA14236,原位自生碳纳米管/二硼化钛陶瓷的韧化机制研究
2014.06-2017.06,主持。
[5].横向课题,HF19047,ETC 候选材料烧结工艺及微观组织/性能分析,2019.04-2020.12,主持。 近年来获得的主要奖励:
[1].福建省高校新世纪优秀人才支持计划,2016,CNTs/TiB2 纳米复合材料的制备及尺度效应的研究。
[2].福建省高校杰出青年科研人才培育计划,2015,碳纳米管在二硼化钛基超高温陶瓷中的作用机理
研究。
近年来获专利情况:
[1]. 国家发明专利:一种 ZrB2 基超高温陶瓷结构及其光固化 3D 打印方法和装置. 201910309889.4
[2]. 国家发明专利:一种光敏性 Zr-B-Si-C 陶瓷前驱体及其原位制备方法. 201910309890.7.
[3]. 国家发明专利:一种 CNTs 增韧 TiB2 陶瓷复合材料及其制备方法. ZL201510539783.5.
[4]. 国家发明专利:一种超高温 CNTs/TiB2-SiC 陶瓷复合材料及其制备方法. ZL201510561635.3.
[5]. 国家发明专利:一种原位合成 CNTs 增韧 TiB2 基超高温陶瓷材料的制备方法. ZL201510539816.6.
近年来发表的代表性学术论著:
[1]. Jia Lin* , Yihang Yang, Houan Zhang, Fenqiang Li, Guimei Huang, Jinhuo Wang. Effect of
catalyst on carbon nanotubes synthesis on titanium diboride via chemical vapor deposition
[J]. Journal of the American Ceramic Society, 103, 4691–4699, 2020.
[2]. Jia Lin* , Yihang Yang, Houan Zhang, Fengqiang Li, Guimei Huang, Chenyan Wu. Preparation
of CNT–Co@TiB 2 by catalytic CVD: Effects of synthesis temperature and growth time [J].
Diamond & Related Materials, 106, 107830, 2020.
[3]. Jia Lin* , Yihang Yang, Houan Zhang, Fenqiang Li, Yulin Yang. Carbon nanotube growth on
titanium boride powder by chemical vapor deposition: Influence of nickel catalyst and
carbon precursor supply [J]. Ceramics International, 46, pp 12409–12415, 2020.
[4]. Jia Lin* , Yihang Yang, Houan Zhang, Fenqiang Li. Effect of source gases on CVD synthesis
of CNTs@TiB 2 composite powders using Ni/Y 2 O 3 as the catalyst [J]. Ceramics International,
46, pp 10704–10709, 2020.
[5]. Jia Lin* , Yihang Yang, Houan Zhang, Bo Su, Yulin Yang. Optimization of CNTs growth on
TiB 2 -based composite powders by CVD with Fe as catalyst [J]. Ceramics International, 46,
pp 3837–3843, 2020.
[6].Weiqiang Chen, Jia Lin* , Yihang Yang, Houan Zhang. Microstructure and mechanical
properties of TiB 2 -CNTs composites prepared by spark plasma sintering [J]. Science of
Advanced Materials, 10, pp 1782–1787, 2018.
[7]. Jia Lin* , Yihang Yang, Houan Zhang, Qin Lin, Bin Zhu. Synthesis and characterization of
in-situ CNTs reinforced TiB 2 -based composite by CVD using Ni catalysts [J]. Ceramics
International, 44, pp 2042–2047, 2018.
[8]. Jia Lin* , Yihang Yang, Houan Zhang, Yulin Yang, Sijie Hu. Effects of synthesis temperature
and Fe catalyst amount on the performance of in situ CNTs/TiB 2 composites [J]. Journal
of Alloys and Compounds, 745, pp 817–824, 2018.
[9]. Jia Lin* , Yihang Yang, Houan Zhang, Chenyan Wu, Naqiong Lin. Microstructures and
mechanical properties of TiB 2 -based composites with self-grown carbon nanotubes
synthesized using Co catalysts [J]. Materials Chemistry and Physics, 204, pp 251–256, 2018.
[10]. Jia Lin* , Yihang Yang, Houan Zhang, Junfei Gong. Effects of CNTs content on the
microstructure and mechanical properties of spark plasma sintered TiB2-SiC ceramics [J].
Ceramics International, 43, pp 1284–1289, 2017.
[11]. Jia Lin* , Yu Huang, Houan Zhang, Yihang Yang, Yongtai Hong. Microstructure and mechanical
properties of multiwalled carbon nanotube toughened spark plasma sintered ZrB 2 composites
[J]. Advances in Applied Ceramics, 115, pp 308–312, 2016.
[12]. Jia Lin* , Yihang Yang, Houan Zhang, Zhuxing Wu, Yu Huang. Effect of sintering temperature
on the mechanical properties and microstructure of carbon nanotubes toughened TiB 2 ceramics
densified by spark plasma sintering [J]. Materials Letters, 166, pp 280–283, 2016.
[13]. Jia Lin* , Yihang Yang, Houan Zhang, Wenfu Chen, Yu Huang. Microstructure and mechanical
properties of TiB 2 ceramics enhanced by SiC particles and carbon nanotubes [J]. Ceramics
International, 42, pp 4627–4631, 2016.
[14]. Jia Lin* , Yu Huang, Houan Zhang, Yihang Yang, Nannan Li. Microstructure and mechanical
properties of spark plasma sintered ZrB 2 – SiC – MWCNT composites [J]. Ceramics
International, 41, pp 15261–15265, 2015.
[15]. Jia Lin* , Yu Huang, Houan Zhang, Yihang Yang, Tuyuan Zhao. Densification and properties
of ZrO 2 fiber toughed ZrB 2 –SiC ceramics via spark plasma sintering [J]. Materials Science
& Engineering A, 644, pp 204–209, 2015.
[16]. Jia Lin* , Yu Huang, Houan Zhang,Yihang Yang, Yue Wu. Spark plasma sintering of ZrO 2 fiber
toughened ZrB 2 -based ultra-high temperature ceramics [J]. Ceramics International, 41, pp
10336–10340, 2015.
[17].Jia Lin*, Yu Huang, Houan Zhang. Damage resistance, R-curve behavior and toughening
mechanisms of ZrB 2 -based composites with SiC whiskers and ZrO 2 fibers [J]. Ceramics
International, 41, pp 2690–2698, 2015. (SCI, IF: 3.50).
[18]. Jia Lin* , Yu Huang, Houan Zhang. Crack-healing and pre-oxidation behavior of ZrO 2 fiber
toughened ZrB 2 -based ceramics [J]. Int. Journal of Refractory Metals and Hard Materials,
48, pp 5–10, 2015.
联系方式
电话:0592-6291325
Email:2013113205@xmut.edu.cn
通讯地址:福建省厦门市集美区理工路 600 号厦门理工学院材料科学与工程学院
邮 编:361024

 

厦门理工学院材料与工程学院

版权所有 ©厦门理工学院材料科学与工程学院保留所有权利

通讯地址:厦门市集美区理工路600号| 邮编:361024

电话:+86-592-6291328